Techmount Center Mount (BMW R1200RT, R1150RT, R1100RT) silver
Bike-specific center mount for BMW R1200RT, R1150RT, and R1100RT. 2.5 shaft length. Height 3.35. Single mounting plate with dimensions 2.25 x 3.
Over-view:
This mount system provides a secure, central-mounting location on motorcycles with non-standard or cast aluminum handlebars. These types of handlebars are most commonly found on touring and sport-touring models such as BMW RTs, BMW GTs and Kawasaki Concourse 14s. These Center Mounts were designed especially for them.
Most common uses are Audio/Video units, MP3 players, cell phones, PDAs, iPhones and GPS equipment.
This is the 3rd generation mount systems, which means that it is interchangeable with any of the 2010 TechMounts and their accessories. Center Mounts have all the adjustability and range of movement of all other TechMount systems. Installation instructions have detailed model specific illustrations that make them easy to install with no modification to the bike. These kits are available in anodized satin silver or titanium finish.
Its a great choice for a center location these Japanese and European bikes. Having no need for a shaft, means the mounted device will be as low as possible. Accessory shafts and holders are available to add even more mounting flexibility.
Kit includes: Installation tools and instructions.
New Side Grip/Pin Base Design:
Allows 360° of rotation without removing any part of the mount. Much easier to make small adjustments with the device in place.
Improved rotational grip (no unwanted side to side movement).
Allows the entire upper portion of the mount to be removed easily by removing one bolt and then installed onto another bike or stored for later use.
Customers can purchase just the base for another bike and move the GPS or other accessory from bike to bike easily. Less expensive (more desirable) for the customer with multiple bikes.
Inter-locking Pivot Design:
Makes the mount more compact. No shaft required.
No slippage over rough terrain.
Inter-locking pin acts as a shear pin in the event of an accident. Allow the device to move out of the way without being lost.
Round Top Plate:
More compact, allows less plate showing with device installed.
Always straight, no angles to clash with the device cradle alignment.
Center and off-set mounting holes, allows the top plate to be mounted centered or off-set as well as to be rotated 360° independently from the rest of the mount.
Safer, no sharp angles.
Has built in counter-rotation pin for added security. Wont droop or sag over rough terrain.
Pre-drilled with the industry standard 4 hole mounting pattern (AMPs) and a camera thumbscrew hole.
New Hybrid Shaft Design:
Combines pivot shaft strength with ball/socket flexibility.
Simpler to install.
All shafts have counter-rotation pins for added security.
Sold as an accessory, means that the customer can add this later.
One shafts fits all 2010 TechMounts, makes selling extension shafts less confusing.
- Bmw Motorcycles R60 2
- 2012 BMW K 1600 GTL E Luxury – Motorcycle Reviews BigbikeMotorCycles.com
- TVS Motors to Tie Up With BMW Motorrad
- The BMWMOCM Message Board: 1984 BMW R100RT Final Edition FOR SALE
- BMW 1200 ST and 1200 RT Reviews
