Suzuki Colleda CO


1980 Sportster Wheel Specs

Harley-Davidson, a Milwaukee-based company, has been producing its Sportster line of motorcycles continuously since 1957, giving it the honor of being the most continuously-produced vehicle in the United States. When it was first introduced, it was hailed as a modern power plant, with an engine that displaced 55 cubic inches and had a compression ratio of 7.5 to one. Consumers purchased 1,983 Sportsters in 1957.

In 1980, the manufacturer sold 14,767 Sportsters.

1977 Yamaha 650 Specs

Yamaha produced the XS650 from 1968 to 1985. The bike was a classic motorcycle. It featured an engine with piston displacement of 654cc.

The 1977 Yamaha XS 650 went from 0 to 100 kph in 6.1 seconds and accelerated from 0 to 60 mph in 5.8 seconds.

Honda produced the XR 500 between 1979 and 1985. The bike is a single-cylinder, four-stroke, off-road motorbike. As its name suggests, it belongs to the class of 500 cc motorcycles, with a piston displacement of 498.00 cc, or 30.39 cubic inches.

The bike can reach a speed of up to 140 km/h, or 87 mph.

BMW’s K1200 RS was initially developed in order to remedy the faults of an earlier-model BMW motorcycle, the K-bike, which was good for touring but was slow and heavy. These faults were rectified with the RS, which eliminated the K-bike’s buzzing sound, introduced BMW’s first six-speed transmission and boasts drastically increased horsepower over that possessed by the K-bike. The K1200 RS retains, however, the K-bike’s aptitude for touring.

Chain and belt drive systems connect a motorcycle’s wheels to its engine. They do have their efficiencies and inefficiencies, and the ultimate decision as to which one is better is based on the user and his individual needs.

Suzuki introduced the sports tourer Katana 600 at the 1987 Paris Bike Show. Outside of North America the Katana 600 was known at the GSX600F. The 1999 model year Katana 600 featured a sleek design and was known for its performance and comfort.

From 1990 through 1997 the Suzuki sold over 40,000 units of the Katana 600 in the U.S. alone, making it one of the top three selling sport tourers for that time period.

A semi-automatic transmission dirt bike is a good halfway point between a fully automatic transmission and a fully manual transmission. You get the control from shifting gears yourself, but you don’t have to worry about the timing and other advanced skills that you need to drive a dirt bike with a clutch. Dirt bikes are different from cars in that the shifting is done by foot, not by hand.

If you can get your head around this, you should be able to competently shift within a day of practice.

Nothing ruins that beauty of your gleaming motorcycle like ugly rust stains on your exhaust. Not only is rust hard on the eyes, but it’s also hard on any surface with which it comes into contact. Remove rust as soon as possible, so it doesn’t spread and cause permanent damage.

Before you run out to purchase those toxic and expensive store-bought rust removers, try using a natural cleaning solution. This rust removal method is safe and inexpensive.

Husqvarna is a Swedish company that has been making motorcycles since 1903. In 2007 BMW bought Husqvarna from MV Agusta. Husqvarna introduced the supermoto SM450 in 2003.

For the 2010 model year, Husqvarna made a number of changes to the SM450, making it lighter and easier to handle by completely redesigning the frame.

Although BMW began producing motorcycle engines for other companies as early as 1921, BMW didn’t manufacture its own bikes until 1923; still, that’s an impressively long history. BMW’s motorcycles are produced by Motorrad, a separate division of BMW. The 2001 BMW R1200 RT is in the touring class; it’s meant for long-distance commutes and comfortably seats two riders.

Building a motorcycle or repairing one often calls for installing the exhaust. Typical motorcycle exhaust systems consist of header pipes that attach to the engine and a muffler that connects to the tail pipe. Newer systems include a catalytic converter as part of the muffler.

Anyone with a basic understanding of mechanical attachments can install a motorcycle exhaust system with relatively little difficulty. Most newer model bikes have metric nuts and bolts that are used to attach the system to the engine and motorcycle frame.

The 2000 VL500 LC Intruder is a wide and low motorbike manufactured by Suzuki Motor Corporation. This model was produced between 1998 and 2002 but belonged to a range of motorbikes called Intruders. The first Intruder hit the market in 1986 but was discontinued in the U.S. in 2005, being replaced with the Boulevard series.

The Intruder name is still used in Europe.

The 1997 Suzuki VZ 800 Marauder is a cruiser motorcycle produced by Suzuki. The 1997 started the Marauder series, which was produced until 2006. The 1997 Suzuki VZ 800 Marauder had an aggressive look and was also quite powerful.

It accelerated from 0 to 60 mph in 6 seconds.

The 1985 Audi 4000S is a compact executive car produced by Audi, a German manufacturer. The car was sold in Europe as Audi 80. The vehicle belonged to the Audi 4000 series sold in the U.S. between 1980 and 1987.

The car is powered by a 1780 cc, or 109.0-cubic inch engine.

KTM is a motorcycle company that released its first bike in 1951, giving it over 50 years of experience before it released the KTM EXC 300 in 2007. KTM developed this Enduro/offroad motorcycle for course and trail riding. Users rated the bike at 74.1 out of 100 on rankings website

The 2000 Chevy Malibu is a mid-sized car produced by Chevrolet, a subsidiary of General Motors. The car comes with a powerful V6 engine, or a V-shaped engine with six cylinders mounted on the engine’s crankcase in two banks of three cylinders. The Chevy Malibu started production in 1997.

Rivaled by very few motorcycles, the 2007 Suzuki Hayabusa 1300 is one of the most powerful sport bikes in existence. This motorcycle is not for the faint of heart, however, because its sheer weight and power make it extremely difficult to handle. As the Suzuki Hayabusa’s specifications suggest, it may not be the motorcycle of choice unless someone has multiple years of experience riding 600 and 1000 cubic centimeter (cc) sport bikes.

The 2002 Honda XR 650 R belongs to the XR series of off-road motorcycle produced by Honda. It can be classified as a dirt bike. The 650 in the bike’s name refers to the displacement of the bike’s engine, measured in cc.

The motorcycle came in red color.

When Michio Suzuki founded his company in 1909, it was with the intention of manufacturing industrial looms for the burgeoning silk industry. However, like Soichiro Honda, motorcycles had an appeal. The first motorcycle created by the company was the Colleda COX in 1955. It was the first of many which ushered the company’s entrance into the Japanese Big Four of motorcycle companies which included Honda, Kawasaki and Yamaha.

The Suzuki DR-Z400SM is example why the Suzuki company continues to create motorcycles that appeal to most riders.

One simple aftermarket option for motorcycles is to switch out the factory handlebar grips for new or customized grips. Even if you liked the original grips, over time the grips can split and start to look distressed. Removing the old grips can be somewhat tricky because the factory usually glues them on tightly so that they do not come off on their own.

You can remove these grips with one simple trick that makes the process much easier.

Aluminum heads reduce the weight of your motorcycle engine. The properties that make aluminum lightweight create a problem for threads cut into the material. Cross-threading threaded fasteners occurs frequently in any aluminum material.

The threads of a spark plug are harder than the female threads in the aluminum spark plug hole. Installing a spark plug off center causes the spark plug threads to cut the female threads. Providing harder threads in an aluminum head reduces the chances of cross-threading.

The 2001 TL1000R is a sport motorcycle manufactured by Suzuki. Suzuki equipped the bike with features such as forged pistons, twin radiators and a clutch that is larger than its previous models of bikes. The 2001 TL1000R has the performance capability of a track-ready racer and the reliability to drive on the roads.

A top manufacturer of both street-legal and off-road motorcycles, Kawasaki released the KX 125 motocross dirt bike from 1974 to 2005. In 2004, the bike featured a powerful but maneuverable design and was rated at 77.2 out of 100 on the rankings website

The cause of exhaust bluing is usually a lean running engine, exhaust that has been overheated, or simply a cheaper single-walled exhaust pipe. Removing the bluing is relatively easy, however the cause of the bluing should be investigated and repaired first. Repeated applications of the processes described below will remove the bluing, but will also eventually remove the chrome from the pipes.

In 1981, Japan-based Yamaha Motor Company released three motorcycles in the 125 class. These were the RD 125, the DT 125 and the YZ 125. All three motorcycle models have sporty designs and engine displacements of 125 cubic centimeters (cc).

However, each 1981 Yamaha 125 also has its own set of specifications.

The Suzuki Intruder is a line of cruiser motorcycles that was manufactured from 1996 until 2004, when it was replaced with the Suzuki Boulevard line. The Intruder 800 represents the entry-level model. Due to the bike’s relatively large engine displacement, however, it is still best suited to those with previous experience on motorcycles.

Soichiro Honda founded the Honda Technical Research Institute in 1946 and began manufacturing two-stroke motorcycle engines. Honda began producing the Nighthawk 750 in 1982 to replace the 1970 CB750, according to The first Nighthawk motorcycles cost around $3,000, and when Honda finally discontinued production in 2003, they sold for $5,800.

The Harley-Davidson Sportster is a range of motorcycles that have been manufactured since 1957 and continue to be produced as of 2010. Due to its engine displacement, the 883 Sportster represents the entry-level model of the Sportster range. The 2011 range consists of one trim: the Sportster SuperLow.

The Suzuki SV 650 is a series of street motorcycles produced from 1999 until 2010. The S version featured a sportier chassis that included higher foot pegs and lower handlebars and was produced from 2000 until 2006. The bike’s technical specifications did not change during its years of production.

The 2005 Honda Shadow Aero is a cruiser style motorcycle with a variety of engine options. The wires that power each turn signal lead to the toggle switch where the ground, positive and negative wires are. The two wires inside the turn signal are positive and negative.

The positive wire is the black one with a white line running down the center and the negative wire is white or solid black.

The 2010 line of Honda Gold Wing touring motorcycles marks the 35th year of production for the luxury-touring bike. The 1975 Gold Wing lacked the familiar fairing. Since its introduction at the Cologne motorcycle show, Honda has continued to modify the Gold Wing, making it Honda’s standard-bearer and earning it inclusion on Cycle World magazine’s Top 10 Bikes list 17 times.

For the 2010 model year Honda offers four distinct Gold Wing package options.

More commonly known as a generator, the alternator of an engine is an integral component that keeps the battery of the engine charged. It also regulates the current to the electrical components, such as the ignition and lighting systems. If an alternator begins to fail, the motorcycle’s headlight will dim or the ignition will fail.

The only option is to replace the alternator, wiring in a new one to keep your bike on the road.

The 1988 Honda Shadow VT 600, also known as the VLX 600, is a cruise motorcycle produced by the Honda Motor Company. According to, the motorbike delivers strong yet smooth V-twin performance, serving as a bike for long distances. The motorcycle appears in Bob Roberts and Batman movies.

The Honda Motor Company is mostly known for its Civic and Accord sedan models in the United States, but Honda has also been the world’s largest manufacturer of motorcycles since 1959. If you are interested in motorcycles, take the time to learn more about the 2004 Honda Shadow Aero 750 motorcycle.

The Honda XR100 and XR100R are known as great bikes for beginners. Honda produced these models from 1981 to 2007. Early models were known as the XR100, and after a suspension change in 1985, the name of the series became the XR100R.

These dirt bikes are built for trails, hills and sand.

Honda produced the CB 1000 motorcycle from 1992 to 1997. However, Honda was selling the bike as late as 1999. The motorcycle was particularly popular in Japan and Europe. The CB 1000 took its engine from the CBR 1000. The engine of the CB 1000, however, saw a loss of 15 horsepower through milder cams, if compared to the CBR 1000’s engine.

The bike belonged to the class of naked touring motorcycles.

Though Suzuki is mostly known for its model of Ninja sport motorcycles that are widely popular among professional and amateur races alike, Suzuki has also manufactured several different dirt and off-road motorcycle models. If you are interested in dirt and off-road motorcycles, you should consider the 2003 Suzuki DRZ 110.

The competitive nature of off-road racing can take a toll on an ATV’s oil supply, quickly depleting the lubricating fluid within a few sessions. Oil checks should be performed before every riding session, as well as after every race to prevent oil starvation, which can cause serious damage to your YFZ450’s motor. You can complete the entire procedure in minutes and do not require extensive mechanical skills.

Rain and cold weather can pose an additional threat to the already dangerous proposition of riding a motorcycle. While the potholes, obstacles and other vehicles can put an end to a quick ride, another threat appears within your helmet: fog. While its not typically a problem on fair weather days, helmet visors have a tendency to haze or fog in colder weather as your breath forms condensation against the inside of the visor.

A few things can be done to alleviate the problems, some being more of a short-term fix than others.

A motorcycle sprocket is a gear that works in tandem with a bike’s chain to allows for changes in torque, speed, and power. Sprockets have metal teeth that determine gear ratio, which in turn determines bike performance.

When young Kawasaki engineers developed the Kawasaki Zephyr in the early 1990s, they were designing a bike that would get back to basics. The ergonomic and simple design of the motorcycle, powered by an air-cooled four-cylinder engine, proved a success and the bike was manufactured and sold throughout the 1990s.

The Honda VF 750, also known as Magna, is a classic cruiser motorcycle produced by Honda between 1982 and 2005. The 1982 VF 750 C was the first motorcycle of this series. Honda mounted a sporty engine to a classic cruiser, producing what became one of the first power cruisers available in the market.

The GT 380 was produced by Suzuki between 1972 and 1978. The motorcycle belonged to the class of two-stroke classic motorcycles. The engine of the Suzuki GT 380 delivered a smooth and reliable performance, though lacked the power of some of its rivals, for example, the Kawasaki triples.

In 1972 the bike cost $925.

Studding your motorcycle’s saddlebags is a simple process that has a big visual impact. If you don’t install the studs properly, though, they can lessen the integrity of the leather and put the items inside the saddlebag in jeopardy. You can also install the studs crooked, resulting in an unattractive saddlebag.

As long as you take your time when studding the saddlebags and use caution, you should find it to be a simple task you can complete in just a few minutes.

Originated in 1995, the Suzuki 1200 Bandit was designed in Japan. This bike was available until it was discontinued in 2006 in the United States. It wasn’t until it was redesigned in 2000, with a new frame, engine and headlight assembly, that the Bandit was made available in its country of origin.

Over the lifetime of this model, two styles of the 1200 Bandit were produced, the 1200 and the 1200S.

If you’re looking to make your bike a little faster, then reducing the weight of the bodywork would be very helpful. Replacing the stock bodywork with a fairing designed for racing, rather than street, use is a good way of maintaining or improving your bikes aerodynamics while reducing the weight of the bodywork and lowering the center of gravity. Good race bodywork will also give you enough space to tuck behind for maximum speed on the straights and also be build of a light enough material that it doesn’t increase the weight of the bike by much.

Most people think of automobiles when the name Honda comes up in conversation. However, Honda also manufactures motorcycles, performance vehicles, boats, jets and scooters — including the 2007 Honda Helix. The 2007 Helix came in red with black accents and had a suggested retail price of $5,349, according to the June 2006 Honda News.

Honda designs, manufactures and distributes a broad range of motorcycles. Street models include Touring, Sport Touring, Crossovers, Cruisers and Choppers. Each motorcycle has a vehicle identification number, which provides manufacturing details about the motorcycle.

It is possible to use the vehicle identification number to find out the year of a specific motorcycle.

The Bavarian Motor Works R1150GS Adventure is a dual sport motorcycle. A dual sport bike is designed for use on paved and unpaved roads. This makes the R1150GS an ideal bike for those who must occasionally venture off paved roads.

In continuous production since 1975, Honda’s Gold Wing GL1000 is a large touring motorcycle that emphasizes reliability over performance. The bike’s reception created a large aftermarket that now exists for Gold Wing accessories and customization. It was assembled at Honda’s Marysville, Ohio plant beginning in 1980, but in 2009 Gold Wing production shifted to a new factory in Kumamoto, Japan.

Problems with an exhaust can rob your bike of performance and power, as well as allow hot gasses out into a potentially dangerous area. Before you start the repair you should decide whether you want it permanent or use a quick fix to hold until you can get to a repair shop.

After extended time and use, the performance of many motorcycles can start to go downhill. But there are many ways to improve your motorcycle’s performance and get it running like new once again. Many of these steps are extremely simple and cost-effective. Keeping your motorcycle running well is not only important for the health of the bike, but for your safety.

Not being able to quickly accelerate while driving can prevent you from escaping dangerous situations.

Motorcycle exhausts are outfitted with several important parts. Among them are the exhaust pipes, muffler and catalytic converter. As these exhaust systems become more sophisticated, greater design measures are taken to make them eco-friendly and less harmful to our environment.

Wearing a motorcycle helmet can save your life but to some it’s an unattractive accessory. Fortunately, there are a variety of ways to custom build your own helmet to reflect your personal style. Design your motorcycle helmet by adding artwork, using state colors, tattoos and mohawks.

In 1990, Honda introduced two entries in its perennial Shadow line: a mid-bore 600 and a big-bore 1100. Both are laid-back, feet-forward, cruiser-style bikes. The Shadow is all about cruising and comfort, not performance and speed, though these bikes feature the reliability and relatively low price that Honda is known for.

Yamaha’s Riva 125 scooter has enjoyed a successful run since its introduction in 1985, receiving only a few revisions until 2001, its final year in production. Hailed as a practical, yet fun way to get around, the Riva 125 requires a deviously complicated procedure to remove the rear wheel for a basic tire change. Although it isn’t beyond the reach of most Riva owners, a fair degree of mechanical aptitude is required.

This job will require a minimum of one hour to complete.

Crash bars, or engine guards, are a common protective accessory installed on many of today’s cruisers and adventure-type motorcycles. While they can enhance a motorcycle’s aesthetics, their main purpose is to protect the motor and frame should the motorcycle crash or slide. Most crash bars are purpose-made for a specific motorcycle, often installing directly to the frame and motor mounts.

Installation is fairly straightforward for most motorcycles, but expect the entire process to take a minimum of 30 minutes to complete.

The 441 Victor was a motorcycle manufactured by BSA that was produced in the early 1960s through the early 1970s. The bike was designed to be an enduro motorcycle, meaning it had off-road and street capabilities. The street version was based upon the professional enduro model ridden by Jeff Smith, on which he won back-to-back racing championships in the mid-1960s.

The Honda Valkyrie motorcycle has been in production since 1996 and it began distribution in the United States in 1997, according to The model was officially known as the F6C Valkyrie and it is considered by many motorcycle enthusiasts to be one of the most powerful motorcycles on the market. In 2003, Honda United Kingdom dropped the F6C from their range and in 2004, Honda United States changed the design of the F6C Valkyrie to become the Valkyrie Rune motorcycle.

The last year of production for the F6C Valkyrie was 2003.

Yamaha’s YZF600R is a versatile machine, operating as a solid foundation to learn the skills needed to ride a sport bike, while being reliable enough for use as a daily commuter. Extending its practicality further is its single-piece seat, combining both rider and passenger seats into one assembly. This design simplifies the removal process, making it easier for new riders to access their YZF600R’s battery and fuses for routine maintenance.

A Power Commander is an important tool in fine-tuning your Suzuki GSX-R sport bike’s fuel-injection system for peak performance. Traditionally, a GSX-R is set up on a Dynometer — which measures the motorcycle’s horsepower, torque and air to fuel ratio — to provide a custom fuel curve that is programmed into the Power Commander through a software interface. While this will achieve the best results, doing so may be beyond most rider’s budgets.

Alternatively, a Power Commander offers a manual programming method, using the trio of buttons on its faceplate, providing a moderate performance increase with a few tuning sessions.

When working on any type of machinery, it is imperative that you have the right tools in order to do the job correctly. Automobiles and motorcycles require constant care and upkeep in order to keep them in good condition and operating as they should. One manufacturer of motorcycles is Harley-Davidson and this brand has a huge following.

However, motorcycles need repair just as often as any other moving vehicle on the road. When it comes time to either maintain or replace the clutch on your Harley-Davidson motorcycle, you should be sure to use the clutch tools that are available.

The Vulcan 750 introduced Kawasaki’s line of motorcycles in 1984. It was Kawasaki’s first V-Twin American style cruiser. The Kawasaki Vulcan 1500 debuted in 1996 with a four-speed transmission and had what was considered at the time as the biggest engine in a mass production motorcycle.

Since its introduction the Vulcan 1500 Classic has been one of Kawasaki’s best-selling cruisers.

The GL 650 is a motorcycle developed by Honda Motor Corporation. While it was only manufactured in 1983, it made up one part of the Silverwing series. This range ran from the inception of the GL 500 in 1981.

While the GL 650 bike was the last of the Silverwings at the time, the Silverwing name was brought back in 2001.

Suzuki Colleda CO

First marketed in 1988 after years of 500cc and 700cc to 800cc Shadows, as well as a big twin with at least 1100cc, Honda’s Shadow 600C VLX was a small motorcycle whose instant popularity caused Honda to offer a deluxe variant starting in 1993. The Shadow 600 VLX was large enough for highway travel and small enough for diminutive or beginner riders. Stylish, reliable and affordable, the 600 VLX became the best-selling imported cruiser of the 1990s.

The 1984 Kawasaki ZG 1300 Voyager is a touring motorcycle produced by the Kawasaki Motors Corporation, a Japanese maker of motorcycles known for manufacturing high-performance bikes. The model incorporated designs from Kawasaki racing motorbikes. As a result, the 1984 Kawasaki ZG 1300 Voyager was one of the fastest motorcycles of its class, having an impressive top speed of 145 mph.

The bike competed against the Honda Gold Wing, a benchmark touring motorcycle.

A sidecar is a great way to convert your motorcycle to operate on slippery roads, carry more luggage or even hold it up at a stop. Unfortunately only a few manufacturers these days actually produce a motorcycle/sidecar combination. Fortunately, it’s not that difficult to convert any motorcycle to a sidecar rig with a few easily obtainable parts.

The first Yamaha dirt bike manufactured was the DT1 made in 1968. All dirt bikes from 1968 to 1980 can be identified with a 15-digit serial number. In 1981 the National Highway Traffic and Safety commission initiated a standardized 15-digit vehicle identification number for all motor vehicles that required specific information in designated locations.

This VIN can be used to identify the model year. The serial number or VIN number can be located on the head, motor or title of the dirt bike.

Honda Motor Co. was founded in 1948. The company initially began by strictly producing motorcycles. Honda began producing its Shadow line of motorcycles in 1983, and they are still produced today. They are built in the fashion of a cruising motorcycle, and their engine sizes range from 125 to 1,800 cubic centimeters.

The 2007 Honda VT750C2 Shadow Spirit was a cruiser motorcycle styled like a hot rod.

While many people love the stock Harley-Davidson Road King, others find it a perfect canvas for their artistic vision. Before setting off to spend your money on parts and accessories, do your design homework in front of the computer. Harley-Davidson’s Customizer tool is not only fun, it gives you the opportunity to explore all the options available to modify your existing Road King, or build a brand new one.

In 1983, Honda entered the V-twin custom cruiser market with the introduction of its Shadow line of bikes. The 1983 model line included a 750 cc displacement Shadow, which in 2002 continued to sport the signature styling of the cruiser class, such as wide-grip handlebars, low-riding seat and a teardrop-shaped tank. Prospective buyers in 2002 could purchase three models of the Honda Shadow 750, the VT750 C2 Shadow, the Shadow Spirit or the Shadow ACE Deluxe.

The VT1100C3 is a cruiser motorcycle developed by Honda that was more commonly known as the Shadow Aero. This bike hit the market in 1998, but was discontinued after only two years. The Aero however only makes up one cruiser from a large series.

The Shadow range began in 1993 with the VT500C and was last seen in 2007 as the Shadow Sabre.

The R6—or YZF-R6, to give it its full name—is a sports bike built by Yamaha. The bike is based on Yamaha racing designs from MotoGP, World Superbike and World Supersport racing, and is aimed at the mid-size street sports market. The 2006 model has a distinctive high-raised rear and aerodynamic front fairings, swooping back from the front wheel.

While hard water stains may diminish the beauty of the appearance of your motorcycle, it is the long-term damage that causes the real problem. Metal and calcium left behind after water evaporates can cause damage to the painted surface of your motorcycle if it is not removed as soon as possible. Before you take your bike to a professional for an expensive stain removal treatment, try a simple do-it-yourself cleaning method that is chemical-free and is environmentally friendly.

The brakes on a Harley-Davidson motorcycle do not require much in the way of overall maintenance, except for periodic inspection of the pads for wear to determine when they need to be replaced. Pad replacement intervals will depend on several factors, including the type of riding and how hard the brakes are used. When changing Harley-Davidson brake pads, for safety the pads for both the front and rear brakes should be replaced at the same time.

Wearing a motorcycle helmet decreases your chance of dying in a motorcycle accident by 37 percent, according to the National Highway Traffic Safety Administration.

The Suzuki DR-Z 400 is an on- off-road motorcycle that is still in production as of 2010. The SM model was manufactured until 2009. The SM suffix stands for Supermoto, a street legal variant that adds 17-inch wheels and improved brakes and forks.

The bike’s high level of versatility coupled with its mid-sized engine displacement makes it ideal for learners as well as casual hobbyists.

The CR 500 E is a cross/motocross motorbike produced in 2002 by Honda Motor Company, a Japanese corporation founded in 1948 that specializes in motorcycle manufacturing. This motorcycle model was the last made in a series that dates back to 1984, when the CR 500 R hit the market.

The CR 125R is a mid-class dirt motorcycle from Honda. The 1998 model year laid the basis for models that followed it, with only minor changes made between years. The 1998 bikes featured a newer intake, new exhaust system and upgraded chassis in comparison the models that preceded it.

The motorcycle has a specification set appropriate for middle-of-the-road models, as it’s not quite an entry-level bike but not a high-end bike either.

The Honda NT 650 Hawk GT is a motorcycle that was manufactured and distributed from 1988 to 1991. A standard bike, the Hawk GT did not feature fairings or windscreens. The motorcycle, however, had plenty of unique features and specifications.

The jets on the 1998 Honda CR125 dirt bike are the small pins on the carburetor that control the flow of air and gas. Eight jets are installed on the carburetor. The stock jets on this carburetor allow the engine to run rich, which fouls the spark plugs if the engine does not stay at or in the power band.

Lowering the gauge of the jets will allow the engine to run thin.

The Harley-Davidson Road Glide is made for touring. Unlike other Harleys, the Road Glide has a frame-mounted fairing and not the bat wing handlebar. Motorcycle Cruiser magazine found only one complaint with the Road Glide, the seat, which seems softer than the Road King’s and bottoms out too quickly on all-day rides. Scott Dalgleish of American Rider magazine agrees, saying that he found the seating a little narrow.

Luckily, replacement seats are available for the Road Glide.

The Kawasaki ZX10 motorcycle is a bike with a large motor. Generally, it is quite fast. However, some riders may desire a little more power, and with that, speed.

There are many aftermarket upgrades for the ZX10 to increase its torque and speed. Many of these are quite cost effective and easy to install. Upgrading your bike can be a great way to customize and make the motorcycle feel more like your own.

When you are going on a trip and want to take your motorcycle with you, tying it down into the bed of a truck is a great way to transport it. This secures the motorcycle in place and will prevent it from being damaged. Tying down the motorcycle so that it sits firmly in the bed of the truck is easy, and takes just a few minutes to complete.

The 2006 Ultra Classic Electra Glide is a motorcycle manufactured by Harley-Davidson. With a base manufacturer’s suggested retail price of $19,795 at release, the Ultra Classic Electra Glide is a touring bike designed for short- or long-distance rides. The motorcycle has a number of characteristics and specifications that make it unique to other bikes.

The 1998 Magnum 425 cc was an all terrain vehicle (ATV) developed by Polaris Industries in 1998. The company is based in Medina, Minnesota and manufactures vehicles from snowmobiles to golf carts. Polaris uses U.S.-based production plants meaning most of their products are completely American made.

The first Magnum hit the market in 1995.

First introduced in 1974 with the XL 100K0, the Honda XL 100 series was a pioneer in the field of affordable, entry level enduro/off-road dirt bikes. Updated and released as the XL 100K1 in 1975, it then became the XL100 until the XL100S went into production in 1979. The series was discontinued in 1985 but is still widely available on the secondhand market.

The 2003 Honda Goldwing is a world-class touring motorcycle known for its fuel efficiency, sport-like handling and high degree of comfort. Some of the key features that contribute to the bike’s overall performance and longevity are its flexible aluminum frame, powerful low-mounted engine and leading-edge fuel injection system.

The Yamaha Corp. is famous worldwide for sports and recreational vehicles, including motorcycles. Yamaha originally started out as a piano manufacturing company, and its expertise with metal alloys led naturally to creating motorized vehicles.

Kawasaki first introduced the GPz1000RX sport bike in 1985 for the 1986 model year. This bike, known in North America as the Ninja 1000R, used the largest-displacement engine that Kawasaki had installed in the Ninja class at that time. Like other models in the GPZ sport lineup, the 1000R featured a full fairing.

There are numerous options for customizing a Harley-Davidson. One of the most common enhancements is changing the exhaust system. The reasons for changing the exhaust include performance, sound and appearance. New systems can cost up to $1,200 or more, but typically average around $500. There are many ways to choose an exhaust system for your Harley-Davidson, and for the price you’ll pay, it’s wise to do extensive research before purchasing your new system.

There are several ways to learn about the different types of exhaust systems on the market.

The XVS650 V-Star Classic is Yamaha’s mid-sized offering in its lineup of V-Star cruiser-touring motorcycles. The street bike features classic Harley-Davidson type styling with lots of chrome trimmings.

The 1980 Honda CT110 motorcycle is a bike used most frequently in the United States and Australia. Deemed the postie bike in Australia for its widespread use as a delivery bike, the Honda CT110 is a one-seater motorcycle designed for reliability and economic soundness. The CT series of motorcycles from Honda are also commonly used on trails and for stunt riding.

The Suzuki GSX 650F is a sport touring motorcycle that was manufactured from 2008, when it replaced the Suzuki Katana, until it was discontinued in the 2009 production year. The motorcycle’s midsized engine displacement made it ideal for those who desired a relatively fast motorcycle but lacked the experience needed for the high-end racing bikes.

One of Honda’s smallest motocross motorcycles, the CR125R entered 1997 with new features that put it ahead of previous versions. Honda’s motocross bike model numbers match up roughly to the size of the engine, with the CR125R having a 125 cc engine. The CR125R came in Honda’s red and white racing colors.

When you buy a new or used KTM motorcycle, some times the battery is not fully charged, and over time the battery will lose power. To fix this problem, all you need to do is charge the battery fully. The battery on a KTM motorcycle is located behind the rear quarter panel on the opposite side of the exhaust.

When you get behind the bike, the battery is in clear view. All you will need is a standard KTM battery charger and about three hours to fully charge the battery.

The brake pedal cover on a Harley-Davidson motorcycle is made of thick rubber and is connected to the pedal in different ways. The cover protects the pedal and gives it a good look. Changing the cover will help you give your Harley a customized look that will fit your personality.

You will need little in terms of tools, and you can remove the brake pedal cover just about anywhere.

It’s important to change the oil in your Shovelhead on a regular basis. For regular oil, the suggested interval is 3,000 miles. If you use synthetic oil, you can ride as much as 5,000 miles between oil changes.

When changing the oil in your motorcycle, be sure to change the oil filter as well. Shovelheads use a spin-on/off oil filter.

Enjoyed by many, motorcycles are two-wheeled vehicles that offer an exciting alternative to cars. With many different types and styles available, including touring, street and dirt bikes, motorcycles have something to attract all different kinds of riders. When considering buying a motorcycle, an important feature to investigate is gas mileage. It’s common for motorcycles to get better mileage than many cars.

A comparison of gas mileage among several different motorcycles — along with other specs — can help you make an educated, informed purchase.

Soichiro Honda founded his company in 1937 with a focus on creating piston rings. This focus switched to motorcycles in the 1940s, and the motorcycles produced in the various categories from racing to cruiser, motocross to racing, sold well and were successful. The CR series was first introduced in the 1970s as a kit bike.

This motorcross bike was extremely popular, and improved versions were released in successive model years. The 2005 CRF 450 is an example of why the CR series of Honda motorcycles continue to please in 2010.

Suzuki Colleda CO
Suzuki Colleda CO
Suzuki Colleda CO

  • Review: Suzuki Bandit 1250 Express & Star
  • Suzuki GSX-R series – Wikipedia, the free encyclopedia
  • Motorcycle Buyers Guide – Suzuki GSX600F Katana
  • Suzuki Hayabusa 1300 Bike Specifications & Prices in India Suzuki Motorcycle…
  • Suzuki Inazuma GW250 India: Launch & Price Rumor – Drivespark