Norton Triumph Prototype

Norton Villiers Triumph


Formation [ edit ]

Triumph had been owned by the BSA Group since 1951, but by 1972 the merged BSA-Triumph group was in serious financial trouble. British Government policy at the time was to save strategic industries with tax payers’ money, and as BSA-Triumph had won the Queen’s Awards for Exports a few years earlier, the industry was deemed eligible for financial support. The Conservative Government under Ted Heath concluded to bail out the company, provided that to compete with the Japanese it merged with financially troubled Norton Villiers (the remains of Associated Motor Cycles. which had gone bust in 1966), a subsidiary of British engineering conglomerate Manganese Bronze .

The merged company was created in 1973, with Manganese Bronze exchanging the motorcycle parts of Norton Villiers in exchange for the non-motorcycling bits of the BSA Group—mainly Carbodies. the builder of the Austin FX4 London taxi. the classic black cab. As BSA was both a failed company and a solely British-known brand (the company’s products had always been most successfully marketed in North America under the Triumph brand), the new conglomerate was called Norton Villiers Triumph—being effectively the consolidation of the entire once-dominant British motorcycle industry, thanks to the rise of the car and the Japanese manufacturers. [ citation needed ]

NVT inherited four motorcycle factories—Small Heath (ex-BSA); Andover and Wolverhampton (Norton ); and Meriden (Triumph). Although Meriden was the most modern [ citation needed ]. its workers were the most militant [ citation needed ] and had the worst productivity of the four. Dennis Poore. the BSA CEO of Norton-Villiers was made Managing Director of NVT, while through his holdings of Norton Villiers shares and the need for reliance on their engineering expertise, a shareholder and director of Manganese Bronze.

Operations [ edit ]

NVT Wankel-engined Commander

Still strapped of development cash, the company was restricted to launching developments of existing products, most notably around the popular Norton Commando. With its classical parallel twin probably by now overdeveloped, from March 1973 the Roadster, Hi Rider, and the Interstate all began to use a new 828cc engine. Later NVT also produced the Easy Rider moped including a sixteener version with pedals and the NVT rambler 125/175cc. This had a Yamaha engine housed in a British monoshock frame.

Instruments were from Yamaha and forks, brakes and wheel parts from three Italian manufacturers. The Rambler later became the BSA Tracker. What money there was for development now had to be focused on one engine development. Deciding that the Japanese had taken the market a step forward, NVT were looking for a competitive edge, and had two products that could be developed, both from the BSA side of the company:

The 500cc twin, stepped-piston engine, with a monocoque pressed steel frame, named internally the Wulf

A rotary Wankel engine

Concluding that the commuter market was dying, NVT chose the Wankel, and as Peter Williams won the 1973 Formula 750 Isle of Man T.T. and Mick Grant came in second for the Norton Racing team that year, the decision was to put the new engine in a new Norton motorcycle. However, the infrastructure of the old Norton company was itself being closed down, as the Andover factory closed after a sit-in. This coincided with the Conservative government of Ted Heath winning the re-election, and the subsidy in light of the Three-Day Week was withdrawn from June 1974, until the Labour Government of Harold Wilson was voted in.

NVT continued with a program of works closures, deciding to concentrate production on Wolverhampton and Small Heath. Poorly handled in communications, the announcement caused a sit-in at Meriden, which as it produced parts for other factories caused Small Heath to shut down. With the election of the 1974 Labour government, the Meriden workers’ co-operative was formed with NVT its sole customer for its production of 750cc Triumph Bonneville T140V and Triumph Tiger TR7V models.

Forced by American legislation to move all brake controls to the right hand side of the bike (the standard used by most other manufacturers, including the Japanese. The foot brake lever on British motorcycles was positioned on the left hand side as it was to this side that sidecars were affixed.

The brake pedal on the sidecar was then positioned alongside the brake pedal of the motorcycle allowing braking of both motorcycle and sidecar with one foot), the company reduced its range to five models: two Norton Commando’s (the Mk.3 Interstate and the Roadster), the Triumph Bonneville T140V, the Triumph Tiger TR7RV and the Triumph Trident T160. Both Nortons and the T160 were improved by the fitting of an electric starter, a rear disk brake and the left side gear change/right foot brake.

The Bonneville got its own electric start in 1980 when marketed by the Meriden worker’s co-operative itself. Unlike other motorcycles of this era the kickstarting lever was retained and the electric starter on Nortons was more properly referred to as an electric assister.

Break up and closure [ edit ]

In July 1975, the new Industry Minister Eric Varley recalled a loan for £4 million and refused to renew the company’s export credits. The company went into receivership, and redundancies were announced for all of the staff at the various sites. Ironically slated by management for closure, the Meriden site survived on Eric Varley’s predecessor, Tony Benn ‘s plan to exploit the Triumph Bonneville by a worker co-operative with a substantial government loan. Its Wolverhampton plant closed on 13 October that year with some 1,600 job losses. [ 1 ]

The Norton Wankel project was sold off by the receivers into private hands, with slow-selling and under-developed rotary engined motorcycles appearing under the Norton name for the next 15 years; [ citation needed ] while Wolverhampton having no viable products to produce was reduced to a workers sit-in and showing of an updated Commando model named Norton 76 and a 500cc twin based on the Wulf concept. After Wolverhampton closed having made Commandos from remaining spares, the workers took the former Tong Castle gates and erected them at the former Marston site.

NVT was eventually liquidated in 1978. Even though Norton Villiers Triumph is no more, motorcycles bearing the Triumph name are still being made; the marketing rights to Triumph were sold to the Meriden worker’s co-operative in 1977 and upon its having gone into receivership in 1983, sold onto a new Triumph Motorcycles Ltd company situated in Hinckley, Leicestershire. Dennis Poore became Managing Director of Maganese Bronze, until his death in 1987.

  • Kawasaki W650 And Triumph Legend TT – Counterbalancer – Motorcyclist Magazine…
  • Triumph America No Baffles
  • Triumph Sprint ST
  • 2005 Triumph Rocket III First Ride – Motorcycle USA
  • 1973 John Player Norton Monocoque – Classic British Motorcycles – Motorcycle…